12 Sep

New Sbf Lake Style Header Kit, 351 Cleveland, 2 Barrel, Hot Rod, 2v, 351c, 4 Outlet

New-Sbf-Lake-Style-Header-Kit-351-Cleveland-2-Barrel-Hot-Rod-2v-351c-4-Outlet-01-rg
New Sbf Lake Style Header Kit, 351 Cleveland, 2 Barrel, Hot Rod, 2v, 351c, 4 Outlet
New Sbf Lake Style Header Kit, 351 Cleveland, 2 Barrel, Hot Rod, 2v, 351c, 4 Outlet
New Sbf Lake Style Header Kit, 351 Cleveland, 2 Barrel, Hot Rod, 2v, 351c, 4 Outlet

New Sbf Lake Style Header Kit, 351 Cleveland, 2 Barrel, Hot Rod, 2v, 351c, 4 Outlet
This Header kit fits Small Block Ford 351ci Cleveland 2 Barrel V-8 Engines. Ostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. All tubing comes pre-bent with enough parts to complete both sides. Supplied with 22 1/2″ tapered 1 7/8″ to 4 mega-phones. The mega-phones are supplied un-cut, just the 1 7/8″ inlet and 4″ diameter outlets, to allow almost any configuration desired by cutting and welding tubes where the customer desires. Originally designed to blow across the salt flats of Bonneville, these exposed Small Block Ford 351 Cleveland 2 Barrel headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Each lake style header kit has a bottom exit flange so you can connect it to a muffled under-car exhaust, if desired, when the end plate is on. Unbolting and removing the end caps, delivers the true horsepower and sound of the Small Block Ford 351 Cleveland 2 Barrel Engine. Supplied with precision cut 1/4 thick flanges to enhance the experience of assembling this quality header kit. Also includes the flanges and tubing to assemble a set of 2 1/2 connectors to complete the installation. No spark plug or spark plug wire restrictions. Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. 1/4 Precision cut head flanges. 1 7/8 pre-bent primary tubes. 1 7/8″ to 4″ mega-phones 22 1/2 long. 2 1/2 flanges and tubing to construct under car hook-up if desired. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Includes gaskets and mounting hardware. Fits All Small Block Ford 351 Cu. Cleveland 2 Barrel V-8 Engines With Standard Exhaust Pattern. Note: These Headers only fit 351 Cleveland 2 Barrel Engines. These header kits need to be assembled by someone who is proficient at fabricating and welding, they are not designed for amateur fabricators. These header kits must either be TIG Welded or MIG Welded. They are not designed to be Arc Welded or Stick Welded. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same header kits available. With either Black or Ceramic-Coated Turnouts included. With 3 1/2 Outlets, both with and without turnouts. DRIVERS SIDE HEADER MEASUREMENT CHART. PASSENGER SIDE HEADER MEASUREMENT CHART. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The item “NEW SBF LAKE STYLE HEADER KIT, 351 CLEVELAND, 2 BARREL, HOT ROD, 2V, 351C, 4 OUTLET” is in sale since Wednesday, January 25, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines, Ukraine, Cayman islands.
  • Manufacturer Part Number: 440-2824
  • Brand: Southwest Speed

New Sbf Lake Style Header Kit, 351 Cleveland, 2 Barrel, Hot Rod, 2v, 351c, 4 Outlet
26 Jun

New Lake Style Header Kit With Turnouts, Black, Flat Head Ford 136-337, Hot Rod, Rat

New-Lake-Style-Header-Kit-With-Turnouts-Black-Flat-Head-Ford-136-337-Hot-Rod-Rat-01-jb
New Lake Style Header Kit With Turnouts, Black, Flat Head Ford 136-337, Hot Rod, Rat
New Lake Style Header Kit With Turnouts, Black, Flat Head Ford 136-337, Hot Rod, Rat
New Lake Style Header Kit With Turnouts, Black, Flat Head Ford 136-337, Hot Rod, Rat

New Lake Style Header Kit With Turnouts, Black, Flat Head Ford 136-337, Hot Rod, Rat
This Southwest Speed Lake Style Header Kit with 3 1/2 Black Turnouts is great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever & nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers and now you can build them yourself and customize them to your vehicle. All tubing comes pre-bent with enough parts to complete both sides. Supplied with 22-1/2″ tapered 1-5/8″ to 3-1/2 mega-phones. The mega-phones are supplied un-cut, just the 1-5/8″ inlet and 3-1/2″ diameter outlets, to allow almost any configuration desired by cutting and welding tubes where the customer desires. Originally designed to blow across the salt flats of Bonneville, these exposed Flat Head Ford headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Running the turnouts delivers the true horsepower of the Flat Head Ford but each lake style header has a bottom exit flange so you can connect it to a muffled under-car exhaust. This will require unbolting the turnouts, & installing the endcaps. The Headers feature 1-5/8″ primary tubes merging to the 3-1/2″ collectors, & comes complete with header bolts and gaskets, reducer bolts and gaskets, and end cap bolts and gaskets. Supplied with precision cut 5/16 thick flanges to enhance the experience of assembling this quality header kit. Also includes the flanges and tubing to assemble a set of 2-1/2 connectors to complete the installation. The 3 1/2″ Diameter Turnouts are supplied with precision cut 1/4″ thick x 5 1/2 Diameter Flanges, complete with bolts and gaskets. Fits angle or straight plug heads, no spark plug or spark plug wire restrictions. Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. 5/16 Precision cut head flanges. 1-5/8 pre-bent primary tubes. 1 5/8″ to 3-1/2″ mega-phones 22-1/2 long. 2-1/2 flanges and tubing to construct under car hook-up if desired. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Includes gaskets and mounting hardware. Designed specifically for Southwest Speed Lake Style Headers. 3 1/2 Diameter Turnout. 1/4″ Thick X 5″ O. 4 X 4 1/4″ Bolt Circle with 5/16″ Bolt Holes. Painted Flat Black to resist early corrosion. Fits All 32-53 Flat Head Ford Engines. Fits 136, 221, 239, 255, & 337 Cubic Inch Flat Head Ford Engines. Won’t Fit V8-60 Engines. These header kits need to be assembled by someone who is proficient at fabricating and welding, they are not designed for amateur fabricators. These header kits must either be TIG Welded or MIG Welded. They are not designed to be Arc Welded or Stick Welded. These Turnouts are painted with a high heat dull black paint. It will generally dull even more when the engine is started. The turnout paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color. If exhaust temperatures are extreme at start the paint will blister and peel. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. DRIVERS SIDE HEADER MEASUREMENT CHART. PASSENGER SIDE HEADER MEASUREMENT CHART. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The free listing tool. The item “NEW LAKE STYLE HEADER KIT WITH TURNOUTS, BLACK, FLAT HEAD FORD 136-337, HOT ROD, RAT” is in sale since Wednesday, July 20, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines, Ukraine, Cayman islands.
  • Manufacturer Part Number: 440-2455, 440-2980
  • Brand: Southwest Speed

New Lake Style Header Kit With Turnouts, Black, Flat Head Ford 136-337, Hot Rod, Rat
22 May

NEW LAKE STYLE HEADER KIT, BBF 429-460ci, 3 1/2 COLLECTOR, FORD, STREET ROD, HOT, RAT

NEW-LAKE-STYLE-HEADER-KIT-BBF-429-460ci-3-1-2-COLLECTOR-FORD-STREET-ROD-HOT-RAT-01-nqo
NEW LAKE STYLE HEADER KIT, BBF 429-460ci, 3 1/2 COLLECTOR, FORD, STREET ROD, HOT, RAT
NEW LAKE STYLE HEADER KIT, BBF 429-460ci, 3 1/2 COLLECTOR, FORD, STREET ROD, HOT, RAT
NEW LAKE STYLE HEADER KIT, BBF 429-460ci, 3 1/2 COLLECTOR, FORD, STREET ROD, HOT, RAT

NEW LAKE STYLE HEADER KIT, BBF 429-460ci, 3 1/2 COLLECTOR, FORD, STREET ROD, HOT, RAT
This Header kit fits Big Block Ford 429-460ci V-8 Engines. This Southwest Speed Lake Style Header Kit is great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever. Nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers and now you can build them yourself and customize them to your vehicle. All tubing comes pre-bent with enough parts to complete both sides. Supplied with 22-1/2″ tapered 1-7/8″ to 3-1/2 mega-phones. The mega-phones are supplied un-cut, just the 1-7/8″ inlet and 3-1/2″ outlet, to allow almost any configuration desired by cutting and welding tubes where the customer desires. Originally designed to blow across the salt flats of Bonneville, these exposed Big Block Ford headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Each lake style header kit has a bottom exit flange so you can connect it to a muffled under-car exhaust, if desired, when the end plate is on. Unbolting and removing the end caps, delivers the true horsepower and sound of the Big Block Ford Engine. Supplied with precision cut 5/16 thick flanges to enhance the experience of assembling this quality header kit. Also includes the flanges and tubing to assemble a set of 2-1/2 connectors to complete the installation. No spark plug or spark plug wire restrictions. Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. 5/16 Precision cut head flanges. 1-7/8 pre-bent primary tubes. 1 7/8″ to 3-1/2″ mega-phones 22-1/2 long. 2-1/2 flanges and tubing to construct under car hook-up if desired. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Includes gaskets and mounting hardware. Fits All 429-460 Cu. Big Block Ford V-8 Engines With Standard Exhaust Pattern. These header kits need to be assembled by someone who is proficient at fabricating and welding, they are not designed for amateur fabricators. These header kits must either be TIG Welded or MIG Welded. They are not designed to be Arc Welded or Stick Welded. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same header kits available with. 3 1/2 collectors with turnouts included. 4 collectors with turnouts included. DRIVERS SIDE HEADER MEASUREMENT CHART. PASSENGER SIDE HEADER MEASUREMENT CHART. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The free listing tool. The item “NEW LAKE STYLE HEADER KIT, BBF 429-460ci, 3 1/2 COLLECTOR, FORD, STREET ROD, HOT, RAT” is in sale since Wednesday, July 20, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines, Ukraine, Cayman islands.
  • Manufacturer Part Number: 440-2816
  • Brand: Southwest Speed

NEW LAKE STYLE HEADER KIT, BBF 429-460ci, 3 1/2 COLLECTOR, FORD, STREET ROD, HOT, RAT
13 May

New Lake Style Ceramic Coated Headers With Turnouts, Sbc 265-400 V-8, Hot Rod, Rat

New-Lake-Style-Ceramic-Coated-Headers-With-Turnouts-Sbc-265-400-V-8-Hot-Rod-Rat-01-sd
New Lake Style Ceramic Coated Headers With Turnouts, Sbc 265-400 V-8, Hot Rod, Rat

New Lake Style Ceramic Coated Headers With Turnouts, Sbc 265-400 V-8, Hot Rod, Rat
This Pair of Southwest Speed Lake Style Headers with 3 1/2 Turnouts is great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever. Nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers. Originally designed to blow across the salt flats of Bonneville, these exposed Small Block Chevy headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Running the turnouts delivers the true horsepower of the Small Block Chevy but each lake style header has a bottom exit flange so you can connect it to a muffled under-car exhaust. This will require unbolting the turnouts, & installing the endcaps. The Headers feature 1-5/8″ primary tubes merging to the 3-1/2″ collectors, & comes complete with header bolts and gaskets, reducer bolts and gaskets, and end cap bolts and gaskets. These headers are Ground parallel with. 350″ flanges on the cylinder head surface, & includes a pair of 2-1/2″ reducers to complete the installation. The 3 1/2″ Diameter Turnouts are supplied with precision cut 1/4″ thick x 5 1/2 Diameter Flanges, complete with bolts and gaskets. Fits angle or straight plug heads, no spark plug or spark plug wire restrictions. Ceramic Hot Coating (CHC) is a heat resistant, ceramic coating applied to the outside of the header. This coating will reflect heat, which helps retain more heat within the header tube, while simultaneously speeding up the exhaust flow. Not only will this coating help you make more horsepower, it also keeps your headers rust-free, looking great, and lasting longer (when properly maintained). If you are looking for a quality finish for your headers, this is it. Good to 1300 degrees. Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. Includes 2-1/2 reducers to connect exhaust under the vehicle. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Ceramic Hot Coated to resist early corrosion. Designed specifically for Southwest Speed Lake Style Headers. 3 1/2 Diameter Turnout. 1/4″ Thick X 5″ O. 4 X 4 1/4″ Bolt Circle with 5/16″ Bolt Holes. Includes gaskets and mounting hardware. Ceramic Hot Coated to resist early rust & corrosion. Fits all small block Chevrolet V-8 engines with standard exhaust pattern. Standard, Vortec, and D-port ZZ-4 heads (not LT-1). Ceramic Hot Coating Warning. Warning: CHC coatings will burn and be damaged at exhaust temperatures over 1300 degrees. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same headers available in. Painted Black Headers with 3 1/2 Painted Black Turnouts. Triple Process Chrome Plated Headers wtih 3 1/2 Ceramic Coated Turnouts. Polished Stainless Steel Headers with 3 1/2 Ceramic Coated Turnouts. DRIVERS SIDE HEADER MEASUREMENT CHART. PASSENGER SIDE HEADER MEASUREMENT CHART. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The item “NEW LAKE STYLE CERAMIC COATED HEADERS WITH TURNOUTS, SBC 265-400 V-8, HOT ROD, RAT” is in sale since Tuesday, September 26, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Ukraine, Cayman islands.
  • Manufacturer Part Number: 440-2315, 440-2983
  • Brand: Southwest Speed

New Lake Style Ceramic Coated Headers With Turnouts, Sbc 265-400 V-8, Hot Rod, Rat
07 May

New Sbf Lake Style Header Kit, 351 Cleveland, 4 Barrel, Hot Rod, 4v, 351c, 4 Outlet

New-Sbf-Lake-Style-Header-Kit-351-Cleveland-4-Barrel-Hot-Rod-4v-351c-4-Outlet-01-id
New Sbf Lake Style Header Kit, 351 Cleveland, 4 Barrel, Hot Rod, 4v, 351c, 4 Outlet
New Sbf Lake Style Header Kit, 351 Cleveland, 4 Barrel, Hot Rod, 4v, 351c, 4 Outlet
New Sbf Lake Style Header Kit, 351 Cleveland, 4 Barrel, Hot Rod, 4v, 351c, 4 Outlet

New Sbf Lake Style Header Kit, 351 Cleveland, 4 Barrel, Hot Rod, 4v, 351c, 4 Outlet
This Header kit fits Small Block Ford 351ci Cleveland 4 Barrel & Boss 302 Engines. Ostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. All tubing comes pre-bent with enough parts to complete both sides. Supplied with 22 1/2″ tapered 1 7/8″ to 4 mega-phones. The mega-phones are supplied un-cut, just the 1 7/8″ inlet and 4″ diameter outlets, to allow almost any configuration desired by cutting and welding tubes where the customer desires. Originally designed to blow across the salt flats of Bonneville, these exposed Small Block Ford 351 Cleveland 4 Barrel headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Each lake style header kit has a bottom exit flange so you can connect it to a muffled under-car exhaust, if desired, when the end plate is on. Unbolting and removing the end caps, delivers the true horsepower and sound of the Small Block Ford 351 Cleveland 4 Barrel Engine. Supplied with precision cut 1/4 thick flanges to enhance the experience of assembling this quality header kit. Also includes the flanges and tubing to assemble a set of 2 1/2 connectors to complete the installation. No spark plug or spark plug wire restrictions. Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. 1/4 Precision cut head flanges. 1 7/8 pre-bent primary tubes. 1 7/8″ to 4″ mega-phones 22-1/2 long. 2 1/2 flanges and tubing to construct under car hook-up if desired. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Includes gaskets and mounting hardware. Fits All Ford Boss 302 and 351 Cu. Cleveland 4 Barrel V-8 Engines With Standard Exhaust Pattern. These header kits need to be assembled by someone who is proficient at fabricating and welding, they are not designed for amateur fabricators. These header kits must either be TIG Welded or MIG Welded. They are not designed to be Arc Welded or Stick Welded. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same header kits available. With either Black or Ceramic-Coated Turnouts included. With 4 Outlets, both with and without turnouts. DRIVERS SIDE HEADER MEASUREMENT CHART. PASSENGER SIDE HEADER MEASUREMENT CHART. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The item “NEW SBF LAKE STYLE HEADER KIT, 351 CLEVELAND, 4 BARREL, HOT ROD, 4V, 351C, 4 OUTLET” is in sale since Wednesday, January 25, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines, Ukraine, Cayman islands.
  • Manufacturer Part Number: 440-2828
  • Brand: Southwest Speed

New Sbf Lake Style Header Kit, 351 Cleveland, 4 Barrel, Hot Rod, 4v, 351c, 4 Outlet
03 May

NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,3 1/2 OUTLET, HOT ROD

NEW-LAKE-STYLE-HEADER-KIT-SMALL-BLOCK-MOPAR-273-360ci-V-8-3-1-2-OUTLET-HOT-ROD-01-zkuc
NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,3 1/2 OUTLET, HOT ROD
NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,3 1/2 OUTLET, HOT ROD
NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,3 1/2 OUTLET, HOT ROD

NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,3 1/2 OUTLET, HOT ROD
This Header kit fits Small Block Mopar 273-360ci V-8 Engines. This Southwest Speed Lake Style Header Kit is great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever. Nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers and now you can build them yourself and customize them to your vehicle. All tubing comes pre-bent with enough parts to complete both sides. Supplied with 22-1/2″ tapered 1-5/8″ to 3-1/2 mega-phones. The mega-phones are supplied un-cut, just the 1-5/8″ inlet and 3-1/2″ outlet, to allow almost any configuration desired by cutting and welding tubes where the customer desires. Originally designed to blow across the salt flats of Bonneville, these exposed Small Block Mopar headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Each lake style header kit has a bottom exit flange so you can connect it to a muffled under-car exhaust, if desired, when the end plate is on. Unbolting and removing the end caps, delivers the true horsepower and sound of the Small Block Mopar Engine. Supplied with precision cut 1/4 thick flanges to enhance the experience of assembling this quality header kit. Also includes the flanges and tubing to assemble a set of 2-1/2 connectors to complete the installation. No spark plug or spark plug wire restrictions. Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. 1/4 Precision cut head flanges. 1-5/8 pre-bent primary tubes. 1 5/8″ to 3-1/2″ mega-phones 22-1/2 long. 2-1/2 flanges and tubing to construct under car hook-up if desired. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Includes gaskets and mounting hardware. Note: The header tubes must be fitted to flanges. Fits all Small Block Mopar Engines with Standard Exhaust Pattern. Fits Small Block Mopar 273, 318, 340, & 360 V-8 Engines. These header kits need to be assembled by someone who is proficient at fabricating and welding, they are not designed for amateur fabricators. These header kits must either be TIG Welded or MIG Welded. They are not designed to be Arc Welded or Stick Welded. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same header kits available with. 3 1/2 collectors with turnouts included. 4 collectors with turnouts included. DRIVERS SIDE HEADER MEASUREMENT CHART. PASSENGER SIDE HEADER MEASUREMENT CHART. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The free listing tool. The item “NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,3 1/2 OUTLET, HOT ROD” is in sale since Wednesday, July 20, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines, Ukraine, Cayman islands.
  • Manufacturer Part Number: 440-2799
  • Brand: Southwest Speed

NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,3 1/2 OUTLET, HOT ROD
02 May

NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,4 COLLECTOR, HOT ROD

NEW-LAKE-STYLE-HEADER-KIT-SMALL-BLOCK-MOPAR-273-360ci-V-8-4-COLLECTOR-HOT-ROD-01-vw
NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,4 COLLECTOR, HOT ROD
NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,4 COLLECTOR, HOT ROD
NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,4 COLLECTOR, HOT ROD

NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,4 COLLECTOR, HOT ROD
This Header kit fits Small Block Mopar 273-360ci V-8 Engines. This Southwest Speed Lake Style Header Kit is great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever. Nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers and now you can build them yourself and customize them to your vehicle. All tubing comes pre-bent with enough parts to complete both sides. Supplied with 22-1/2″ tapered 1-5/8″ to 4 mega-phones. The mega-phones are supplied un-cut, just the 1-5/8″ inlet and 4″ outlet, to allow almost any configuration desired by cutting and welding tubes where the customer desires. Originally designed to blow across the salt flats of Bonneville, these exposed Small Block Mopar headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Each lake style header kit has a bottom exit flange so you can connect it to a muffled under-car exhaust, if desired, when the end plate is on. Unbolting and removing the end caps, delivers the true horsepower and sound of the Small Block Mopar Engine. Supplied with precision cut 1/4 thick flanges to enhance the experience of assembling this quality header kit. Also includes the flanges and tubing to assemble a set of 2-1/2 connectors to complete the installation. No spark plug or spark plug wire restrictions. Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. 1/4 Precision cut head flanges. 1-5/8 pre-bent primary tubes. 1 5/8″ to 4″ mega-phones 22-1/2 long. 2-1/2 flanges and tubing to construct under car hook-up if desired. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Includes gaskets and mounting hardware. Note: The header tubes must be fitted to flanges. Fits all Small Block Mopar Engines with Standard Exhaust Pattern. Fits Small Block Mopar 273, 318, 340, & 360 V-8 Engines. These header kits need to be assembled by someone who is proficient at fabricating and welding, they are not designed for amateur fabricators. These header kits must either be TIG Welded or MIG Welded. They are not designed to be Arc Welded or Stick Welded. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same header kits available with. 3 1/2 collectors with turnouts included. 4 collectors with turnouts included. DRIVERS SIDE HEADER MEASUREMENT CHART. PASSENGER SIDE HEADER MEASUREMENT CHART. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The free listing tool. The item “NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,4 COLLECTOR, HOT ROD” is in sale since Wednesday, July 20, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines, Ukraine, Cayman islands.
  • Manufacturer Part Number: 440-2803
  • Brand: Southwest Speed

NEW LAKE STYLE HEADER KIT, SMALL BLOCK MOPAR 273-360ci V-8,4 COLLECTOR, HOT ROD
26 Apr

New Lake Style Headers, Sbc 265-400 V-8, Chrome, Chevy, Hot Rod, Street, Rat, Vintage

New-Lake-Style-Headers-Sbc-265-400-V-8-Chrome-Chevy-Hot-Rod-Street-Rat-Vintage-01-gt
New Lake Style Headers, Sbc 265-400 V-8, Chrome, Chevy, Hot Rod, Street, Rat, Vintage

New Lake Style Headers, Sbc 265-400 V-8, Chrome, Chevy, Hot Rod, Street, Rat, Vintage
This Pair of Southwest Speed Lake Style Headers are great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever. Nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers. Originally designed to blow across the salt flats of Bonneville, these exposed small block Chevy headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Each lake style header has a bottom exit flange so you can connect it to a muffled under-car exhaust when the end plate is on. Unbolting and removing the end caps delivers the true horsepower and sound of the small block Chevy. These headers are Ground parallel with. 350″ flanges on the cylinder head surface, & includes a pair of 2-1/2″ reducers to complete the installation. These lake style headers fit angle or straight plug heads, and no spark plug or spark plug wire restrictions. Note: Refer to measurement chart below to insure headers will fit your vehicle and application. Includes 2-1/2 reducers to connect exhaust under the vehicle. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Includes gaskets and mounting hardware. Triple Chrome Plated to resist early corrosion. Fits all small block Chevrolet V-8 engines with standard exhaust pattern. Standard, Vortec, and D-port ZZ-4 heads (not LT-1). Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today’s chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. We see very few headers that do not change color once exhaust temperatures are achieved. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same headers available in. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The free listing tool. The item “NEW LAKE STYLE HEADERS, SBC 265-400 V-8, CHROME, CHEVY, HOT ROD, STREET, RAT, VINTAGE” is in sale since Friday, August 7, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Ukraine.
  • Brand: Southwest Speed
  • Manufacturer Part Number: 440-2313
  • Surface Finish: Triple Chrome Plated

New Lake Style Headers, Sbc 265-400 V-8, Chrome, Chevy, Hot Rod, Street, Rat, Vintage
25 Apr

New Lake Style Headers With Turnouts, Black, Sbc 265-400 V-8, Chevy, Hot Rod, Street

New-Lake-Style-Headers-With-Turnouts-Black-Sbc-265-400-V-8-Chevy-Hot-Rod-Street-01-srr
New Lake Style Headers With Turnouts, Black, Sbc 265-400 V-8, Chevy, Hot Rod, Street
New Lake Style Headers With Turnouts, Black, Sbc 265-400 V-8, Chevy, Hot Rod, Street
New Lake Style Headers With Turnouts, Black, Sbc 265-400 V-8, Chevy, Hot Rod, Street

New Lake Style Headers With Turnouts, Black, Sbc 265-400 V-8, Chevy, Hot Rod, Street
This Pair of Southwest Speed Lake Style Headers with 3 1/2 Turnouts is great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever. Nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers. Originally designed to blow across the salt flats of Bonneville, these exposed Small Block Chevy headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Running the turnouts delivers the true horsepower of the Small Block Chevy but each lake style header has a bottom exit flange so you can connect it to a muffled under-car exhaust. This will require unbolting the turnouts, & installing the endcaps. The Headers feature 1-5/8″ primary tubes merging to the 3-1/2″ collectors, & comes complete with header bolts and gaskets, reducer bolts and gaskets, and end cap bolts and gaskets. These headers are Ground parallel with. 350″ flanges on the cylinder head surface, & includes a pair of 2-1/2″ reducers to complete the installation. The 3 1/2″ Diameter Turnouts are supplied with precision cut 1/4″ thick x 5 1/2 Diameter Flanges, complete with bolts and gaskets. Fits angle or straight plug heads, no spark plug or spark plug wire restrictions. Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. Includes 2-1/2 reducers to connect exhaust under the vehicle. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Painted Flat Black to resist early corrosion. Designed specifically for Southwest Speed Lake Style Headers. 3 1/2 Diameter Turnout. 1/4″ Thick X 5″ O. 4 X 4 1/4″ Bolt Circle with 5/16″ Bolt Holes. Includes gaskets and mounting hardware. Fits all small block Chevrolet V-8 engines with standard exhaust pattern. Standard, Vortec, and D-port ZZ-4 heads (not LT-1). These Headers & Turnouts are painted with a high heat dull black paint. It will generally dull even more when the engine is started. The header paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color. If exhaust temperatures are extreme at start the paint will blister and peel. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same headers available in. Chrome-Plated Headers with 3 1/2 Ceramic Coated Turnouts. Polished Stainless Steel Headers wtih 3 1/2 Ceramic Coated Turnouts. Ceramic Hot Coated Headers with 3 1/2 Ceramic Coated Turnouts. DRIVERS SIDE HEADER MEASUREMENT CHART. PASSENGER SIDE HEADER MEASUREMENT CHART. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The item “NEW LAKE STYLE HEADERS WITH TURNOUTS, BLACK, SBC 265-400 V-8, CHEVY, HOT ROD, STREET” is in sale since Wednesday, July 20, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Philippines, Ukraine, Cayman islands.
  • Manufacturer Part Number: 440-2312, 440-2980
  • Brand: Southwest Speed

New Lake Style Headers With Turnouts, Black, Sbc 265-400 V-8, Chevy, Hot Rod, Street
24 Apr

New Lake Style Headers, Sbc 265-400 V-8, Ceramic Coated, Chevy, Hot Rod, Street, Rat

New-Lake-Style-Headers-Sbc-265-400-V-8-Ceramic-Coated-Chevy-Hot-Rod-Street-Rat-01-mj
New Lake Style Headers, Sbc 265-400 V-8, Ceramic Coated, Chevy, Hot Rod, Street, Rat

New Lake Style Headers, Sbc 265-400 V-8, Ceramic Coated, Chevy, Hot Rod, Street, Rat
This Pair of Southwest Speed Lake Style Headers are great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever. Nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers. Originally designed to blow across the salt flats of Bonneville, these exposed small block Chevy headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Each lake style header has a bottom exit flange so you can connect it to a muffled under-car exhaust when the end plate is on. Unbolting and removing the end caps delivers the true horsepower and sound of the small block Chevy. These headers are Ground parallel with. 350″ flanges on the cylinder head surface, & includes a pair of 2-1/2″ reducers to complete the installation. These lake style headers fit angle or straight plug heads, and no spark plug or spark plug wire restrictions. Ceramic Hot Coating (CHC) is a heat resistant, ceramic coating applied to the outside of the header. This coating will reflect heat, which helps retain more heat within the header tube while simultaneously speeding up the exhaust flow. Not only will this coating help you make more horsepower, it also keeps your headers rust-free, looking great, and lasting longer (when properly maintained). If you are looking for a quality finish for your headers, this is it. Good to 1300 degrees. Note: Refer to measurement chart below to insure headers will fit your vehicle and application. Includes 2-1/2 reducers to connect exhaust under the vehicle. Removable end plates allow you to run open headers with ease. Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod. Nice Choice to replace cast iron exhaust manifolds. Enhances the looks of any rod. Includes gaskets and mounting hardware. Ceramic hot coated to resist early rust & corrosion. Fits all small block Chevrolet V-8 engines with standard exhaust pattern. Standard, Vortec, and D-port ZZ-4 heads (not LT-1). Ceramic Hot Coating Warning. Warning: CHC coatings will burn and be damaged at exhaust temperatures over 1300 degrees. Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We also have these same headers available in. We also have thousands of other High Performance Parts in our store. We want you to have the parts as bad as you do. The free listing tool. The item “NEW LAKE STYLE HEADERS, SBC 265-400 V-8, CERAMIC COATED, CHEVY, HOT ROD, STREET, RAT” is in sale since Friday, August 7, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “kratter” and is located in High Performance Parts. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Ukraine.
  • Brand: Southwest Speed
  • Manufacturer Part Number: 440-2315
  • Surface Finish: Ceramic Hot Coated

New Lake Style Headers, Sbc 265-400 V-8, Ceramic Coated, Chevy, Hot Rod, Street, Rat